Turbocharged Mad Max Scrambler Build Timelapse - Suzuki GS400

Описание к видео Turbocharged Mad Max Scrambler Build Timelapse - Suzuki GS400

Watch me turn this seized junkyard gs400 into a boosted scrambler!


Want to learn how to turbo you vintage bike?   / doctormotorcycle  


Current videos on Patreon Include

-How to Turbocharge your Vintage Motorcycle, Draw Through and Blow Through; A Complete Guide
-How to Wire your Motorcycle From Scratch, with No Experience
-How to Shorten and Modify Clutch And Throttle Cables

www.doctor-motorcycle.com

Acceleration and riding video -    • Turbo (VZ21) GS400 Acceleration and D...  


This was a lot of work. There were some things that were left out in the final timelapse build video that are explained in the individual parts of this build (mainly parts 5-10). So if you are watching and notice that I switched carb setups and turbo's, watch those earlier videos, they are more in depth and I explain what I'm doing. The bike runs great now (though it does burn oil because of the draw-through turbo setup) and makes a full 12 PSI of boost! Below are links for all of the parts I used, from the turbo setup to the electronics.

Amazon Affiliate Links -

What I use to un-sieze an engine (on both my XS650 Build and This Build)

Marvel Mystery Oil https://amzn.to/345LiiY
Liquid Wrench - https://amzn.to/2K1fgO2

Turbo Stuff -

The original turbo (too big) https://amzn.to/371Htx4
The 2nd turbo (Makes 12 PSI now) https://amzn.to/375FqYJ
The original Carb (too big) https://amzn.to/2LeNLRp
The 2nd Carb (Works Great) https://amzn.to/3a0TR2m
Silicone couplers https://amzn.to/2JRzRV7
Boost Gauge https://amzn.to/340Asui
AEM Wideband https://amzn.to/340ibgY
Flanges https://amzn.to/3n1EQAS
Turbo Oil Feed Line https://amzn.to/3n8smY7

Wiring/Ignition-

Electronic Ignition - https://www.dimecitycycles.com/dyna-s... (Please note, you can find this kit on ebay for $50 cheaper, however if I post the ebay link it will eventually expire. If you're going to buy this kit, get it on ebay!)

Iridium Spark Plugs - https://amzn.to/3oJCzdX
Fuse Block https://amzn.to/2IEaTbe
Wires https://amzn.to/387byL9
Wire Harness Tape https://amzn.to/3lZDh5e
WaterProof Connectors https://amzn.to/3gB60Mp
AntiGravity 4 Cell Battery https://amzn.to/3m69fNc

Custom Seat Pan Materials-

Fiberglass Resin https://amzn.to/3m7YYzU
Fiberglass Mat https://amzn.to/3m6VMEW
Brushes https://amzn.to/3qMnQkk
Cling Wrap https://amzn.to/375VGJy
Wax (to prevent sticking) https://amzn.to/3m1V0Jn
Seat Foam https://amzn.to/39TVxdU
Foam Shaping Tool https://amzn.to/33ZTnWl

Fluids I use in all my Vintage Bikes

Shell Rotella (wet clutch safe) https://amzn.to/3qNzn2R
Fork Oil https://amzn.to/348yIzv
Alternate fork oil https://amzn.to/3gGebHn
Flange Sealant (To delete the base gasket and raise the compression) https://amzn.to/3neGf7d

Tools I use

Transfer punch, for drilling on center (the intake flange bolt holes) https://amzn.to/3qRzeLJ
Automatic Center Punch https://amzn.to/3nc8xiU
Cordless Drill https://amzn.to/379FBlQ
Cordless Impact https://amzn.to/2W8rmHN

Misc

Handlebars https://amzn.to/3qNAgIH
Grips https://amzn.to/39Wl8Tu
Throttle Tube/cable https://amzn.to/3413Alm
Master Cylinder https://amzn.to/3m7e6Of

Комментарии

Информация по комментариям в разработке